How do I get an SD card reader to work in Ubuntu 13.04?
I tested ubuntu 13.10 on clevo w310CZ, with similar realtek's chipset (no 5289 but 5286) sd card no mount too
and no one kernel module load
$ sudo lspci -v -s 03:00.0
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5286 (rev 01) Subsystem: CLEVO/KAPOK Computer Device 3110
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f7400000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] ExpressEndpoint, MSI 00
Capabilities: [b0] MSI-X: Enable- Count=1 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-01-00-4c-e0-00
I've tried to fix this bug :Realtek Card Reader RTL8411 Device 5289 (PCI 03:00.0) Driver and udisks Rule.
worked on Ubuntu 12.04 but doesn't on 13.10
I posted a new Bug here 10ec:5286 [Clevo W310CZ] Realtek Card Reader not working.
Related videos on Youtube
NuclearEagleFox
Updated on September 18, 2022Comments
-
NuclearEagleFox over 1 year
I'm running Ubuntu 13.04 on a CLEVO P151EMx, it has a built-in Realtek PCIE Cardreader 5289, which works fine in Windows, but refuses to show up in Ubuntu.
I can't see any sd cards I put in it in /dev, and lspci shows it as follows:
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
I've tried the fix here: https://bugs.launchpad.net/ubuntu/+source/udisks/+bug/971876. But no luck.
Any suggestions?
P.S. I'm trying to format a microSDHC card using fdisk for use in a BeagleBone Black, if that helps.
Someone asked for the output of lspci -v -s 03:00.0:
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01) Subsystem: CLEVO/KAPOK Computer Device 5105<br> Flags: bus master, fast devsel, latency 0, IRQ 43<br> Memory at f7a00000 (32-bit, non-prefetchable) [size=64K]<br> Capabilities: access denied <br> Kernel driver in use: rtsx_pci
The relevant entries in dmesg -T are:
[Tue May 21 15:19:36 2013] mmc0: error -110 whilst initialising SD card [Tue May 21 15:19:37 2013] mmc0: error -110 whilst initialising SD card [Tue May 21 15:19:36 2013] mmc0: error -110 whilst initialising SD card
-
Scott Goodgame almost 11 yearsI know this dosen't help, but I've had the same problems on numerous netbooks/laptops. The problem is that it dosen't show up as a standard ide device, so drivers must be written for specific implementations. I just ended up giving up and buying a $2 sd card reader from amazon.
-
Grzegorz Żur almost 11 yearsI have Clevo W110ER with the same card reader. I needed this rts-bpp driver in Ubuntu 12.10 but in 13.04 it works out of the box. The driver in use is
rtsx_pci
. Show yourlspci -v -s 03:00.0
. -
NuclearEagleFox almost 11 years@guntbert Uh..thanks? I figured since it was more relevant to the comments, I would put it here, but it's been added to the post anyway.
-
Grzegorz Żur almost 11 yearsIt seems you have module loaded for this device. What
dmesg -T
shows when you insert a card? Filter only relevant log entries by date please. Relevant log lines start withmmc
. My card show up as/dev/mmcblk0*
. -
NuclearEagleFox almost 11 years@Grzegorz Added the entries to the question
-
Grzegorz Żur almost 11 yearsSame issue askubuntu.com/questions/256866/… and solution with patch talk.maemo.org/showthread.php?t=72789 That's all I can do.
-