Beats audio driver for hp dv6-7040tx
7,897
NO problem @CL. Got it working... Did the following:
First, edit the following file:
sudo gedit /etc/pulse/daemon.conf
Uncommment and change the values of these lines:
enable-lfe-remixing = yes
default-sample-channels = 4
default-channel-map = front-left,front-right,center,lfe
Second, edit the following file:
sudo gedit /etc/pulse/default.pa
Add the following line to the end:
load-module module-combine channels=4 channel_map=front-left,front-right,center,lfe
Related videos on Youtube
Author by
SilleBille
Updated on September 18, 2022Comments
-
SilleBille over 1 year
Here is the model of my laptop: http://www.gadgetsguru.com/hp-dv6-7040tx-lowest-price-spec-cheap-sale-india-15613.aspx
As the specs say, it has quad speakers with a sub-woofer... When i was using windows 8, i had no problems. But, now only two speakers work and no sub-woofer.
I recently switched over to ubuntu and i'm a newbie :).. Please post a step-by-step guide for installing audio driver.
I heard that alsa is pre installed in ubuntu 13.04
Thanks for your replies :)
-
CL. almost 11 yearsYou do not need installation but configuration. Please show the output of the alsa-info script.
-
SilleBille almost 11 yearsThis is what i got: alsa-project.org/db/?f=6ef7873adba40f9301449c0ab1bd42ee2af3dfbb
-
CL. almost 11 yearsDoes
speaker-test -D hw:0,0 -t wav -c 6
work? -
SilleBille almost 11 years
speaker-test 1.0.25 Playback device is hw:0,0 Stream parameters are 48000Hz, S16_LE, 6 channels WAV file(s) Channels count (6) not available for playbacks: Invalid argument Setting of hwparams failed: Invalid argument
This is the output i got! -
user271894 about 10 yearsI could not get it working - first I tried to enter sudo gedit /etc/modprobe.d/alsa-base.conf and add line options snd-hda-intel model=ref as described in other solution - it did not work at first. But after changing 'ref' value to the default hostname of my laptop which is always set up by the system during the installation process, it worked perfect. I think that by typing ref, it pulls the hostname and tries to compare the settings somehow, but if You set other name than default, which is a laptop model, it will not work unless You enter the command like that: options snd-hda-intel model=HP
-