Building GCC requires GMP 4.2+, MPFR 2.3.1+ and MPC 0.8.0+
Solution 1
In the directory where I have those libraries installed (/usr/gnu64/lib
), I also have a libgmp.la
file (and libmpc.la
and libmpfr.la
files), which contain readable text. The SO version information is in there, but that is not quite the same as the 'product version'. It tells about link compatibility instead.
I was trying to investigate which version I had, and the weird solution I came up with was to run the GCC (4.6.1) that I built with the -v
option. In part, it said:
GNU C (GCC) version 4.6.1 (x86_64-apple-darwin11.1.0)
compiled by GNU C version 4.6.1, GMP version 5.0.1, MPFR version 3.0.0, MPC version 0.8.2
warning: GMP header version 5.0.1 differs from library version 5.0.2.
warning: MPFR header version 3.0.0 differs from library version 3.1.0.
warning: MPC header version 0.8.2 differs from library version 0.9.
So, it appears that I have GMP 5.0.2 installed (but I built GCC with 5.0.1), and MPFR 3.1.0 (but I built GCC with 3.0.0) and MPC 0.9 (but I built GCC with 0.8.2). The mismatch comes about because I tried to compile and install GCC 4.6.2 and it presumably needed the newer versions. (I didn't succeed, but that's a different story.)
I install my custom-built libraries in /usr/gnu64/lib
, and then tell GCC that's where to find them with the configure options --with-mpfr=/usr/gnu64/lib
, --with-gmp=/usr/gnu64/lib
, --with-mpc=/usr/gnu/64/lib
. These paths are hard-wired into GCC and it works from there.
Solution 2
Inside the gcc directory, do this command:
./contrib/download_prerequisites
After that script, GMP, MPFR, and MPC will be ready to use. Continue with ./configure
.
Solution 3
I had the same problem trying to install/compile GCC 4.8.1. Here is how I solved:
In Debian, just run this two commands:
apt-get install libmpc-dev
./configure
Solution 4
I had the same problem compiling GCC 4.9 branch.
For Red Hat and Fedora based systems, run the following command:
sudo yum install gmp gmp-devel mpfr mpfr-devel libmpc libmpc-devel
This will install the GNU multiple-precision (MP) libraries for integer, floating point, and complex numbers.
Solution 5
Centos7: sudo yum install libmpc-devel
Programmer
Updated on October 29, 2020Comments
-
Programmer over 3 years
I downloaded GCC 4.5 from http://www.netgull.com/gcc/releases/gcc-4.5.0/ but when I try to setup / build I am getting below error:
Linux:>~/shared_scripts/bin/gcc/gcc-4.5.0 1040> /x/home/prakash_satya/shared_scripts/bin/gcc/gcc-4.5.0/configure CC="gcc -m64" --prefix=/x/home/prakash_satya/shared_scripts/bin/gcc/gcc-4.5.0 --with-gmp-lib=/usr/lib64 --with-mpfr-lib=/usr/lib64 --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --enable-languages=c,c++ checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether ln works... yes checking whether ln -s works... yes checking for a sed that does not truncate output... /bin/sed checking for gawk... gawk checking for gcc... gcc -m64 checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc -m64 accepts -g... yes checking for gcc -m64 option to accept ISO C89... none needed checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for gnatbind... no checking for gnatmake... no checking whether compiler driver understands Ada... no checking how to compare bootstrapped objects... cmp --ignore-initial=16 $$f1 $$f2 checking for objdir... .libs checking for the correct version of gmp.h... no configure: error: Building GCC requires GMP 4.2+, MPFR 2.3.1+ and MPC 0.8.0+. Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify their locations. Source code for these libraries can be found at their respective hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/. See also http://gcc.gnu.org/install/prerequisites.html for additional info. If you obtained GMP, MPFR and/or MPC from a vendor distribution package, make sure that you have installed both the libraries and the header files. They may be located in separate packages. Linux:>~/shared_scripts/bin/gcc/gcc-4.5.0 1041>
The following libs are present in respective directories
/usr/lib/libgmp.a /usr/lib64/libgmp.a /usr/lib/libmpfr.a /usr/lib64/libmpfr.a
I do not have libmpc.a library installed anywhere in boxes.
Based upon the error how can I know :
a) what is the current version of libgmp.a and libmpfr.a are installed.
b) If they are of incorrect version how can I deploy my own version without disturbing the current one?
-
Programmer over 12 yearsI tried the same step but copying .a and .la to a local folder using --with-gmp/mpfr to local folder but it stills give the same error. Also I downloaded and build gmp/mpfr/mpc from gcc.gnu.org/pub/gcc/infrastructure [gmp-4.3.2.tar.bz2,mpfr-2.4.2.tar.bz2,mpc-0.8.1.tar.gz] but building mpc states - configure: error: GMP version >= 4.2 required while gcc still staes the same error.
-
Jonathan Leffler over 12 years@Prakash: in that case, assume GCC and its configuration suite knows what it is doing, and get on with compiling and installing the other three libraries. I've always done it as a separate operation, without reference to GCC (even though GCC triggered the rebuilds). I believe there may be a way to get GCC to build and install the libraries as it goes - by having the source for GMP, MPFR, MPC in the GCC source tree. Check the
./configure --help
output for information. -
Jonathon Hill over 10 yearsOn Amazon Linux, it's
sudo yum install libmpc-devel
-
Jonathan Leffler about 10 yearsSince writing this, I've taken to having GCC build the version of GMP, MPFR and MPC along with the compiler. I now get the source for the current version of the library, and extract it into the top-level directory of the GCC source: gmp-6.0.0, mpfr-3.1.2, etc. Then I create a symlink for each of them:
ln -s gmp-6.0.0 gmp; ln -s mpfr-3.1.2 mpfr; ln -s mpc-1.0.2 mpc
. Then I run GCC configure and build, and GCC builds these libraries too. -
bebbo about 8 yearsCentos also needs
sudo yum install libmpc-devel
-
Emile Vrijdags over 7 yearsWas trying to install gcc 6.2 on bash on ubuntu on windows, this command worked for me. Thanks!
-
Arnon about 7 yearsThanks for that. I was stuck on a machine with no
sudo
, and this solved my woes -
Stephen C almost 7 yearsI have been looking for this all day. Thanks so much!
-
Daniel Brooks over 6 yearsYou are my hero.
-
Admin almost 6 yearsOn ubuntu 16 it is sudo apt-get install libmpc-dev
-
evensis almost 6 yearsDead on, this should be the correct answer. Super star.
-
cn123h about 5 yearsOne thing to mention: this command must be run in the gcc source root folder, it will download the files under there, if run it in other place, configure still cannot find the correct files.
-
Alexander Samoylov over 4 yearsThanks. It worked for me even on really old CentOS 4 when I wanted to compile newer GCC there.
-
Josh over 4 yearsGood on you for providing an answer . FYI rather than just give an answer It would be helpful to others to tell why you would want to run that command and what it should do. It is also a good idea to ensure that you answer all of the question that is asked
-
Phiber over 4 yearsWorks for me! (on centos)
-
Nathan B about 3 yearsOn Raspbian 9.13 there isn't such thing as libmpc-dev
-
smmehrab about 3 yearsWorked like a charm!