Change Ethernet adapter speed from 100.0 Mbps to 1.0 Gbps
43,907
You need to check the cables
- There are cables and cables. Since you have two, switch them between the machines and see what happens
- Sometimes there are problems with the cables not being plugged in properly (esp. if the "hook" doesn't work or is missing). While I'd expect no connection, check this anyway.
Related videos on Youtube
Author by
steampowered
Updated on September 18, 2022Comments
-
steampowered almost 2 years
The stock NIC on my MSI Big Bang Xpower is a Realtek PCIe GBE RTL8111DL adapter. The NIC is reporting a speed of 100.0 Mbps, but the manufacturer's website says it is a Gigabit controller.
I read the NIC will auto negotiate the connection speed to the highest availalbe. I have it connected to a D-Link 5 port DGS 2205, which is a Gigabit device. Since both devices are Gigabit, I would expect the NIC to connect using a Gigabit speed.
I have another computer connected to this switch, and that comptuer is reporting 1.0 Gbps. So I suspect a configuration problem with the first computer's NIC. All connections use Cat5e cable.
How can I configure this Gigabit NIC to connect at speeds of 1.0 Gbps?
-
Chris Nava over 12 yearsTry a different patch cord. The one you are using may be sub standard.
-
Admin over 12 yearsCheck the cable, if you are using a Cat-5 cable it won't run at 1 Gbps.
-
HikeMike over 12 yearsSwitch the cables around. Maybe the one you're using for this machine has a problem.
-
HikeMike over 12 years@JM. Glad that worked, and thanks for your offer.
-
Teapod over 6 yearsOn newer LAN cards CAT5 cables works fine with Gigabit. On older LAN cards Gigabit worked only with CAT6 cables for us.
-
-
steampowered over 12 yearsThis switch does gigabit on all 5 ports. In addition, switching ports with the computer which is connected at 1.0 Gbps has no effect. The driver on the NIC adapters is the latest driver.