Expand RAID array on HP Dynamic Smart Array B320i controller

Question

Is there a python binding for the saleae logic software? I know for the deprecated version 1.2.x is a python binding present.

I'm looking for an equivalent for the version 2. I know that the software has already filters, which can be written in python.

Used case

To automate a timing analysis I want to run a simple python script. This initiates a saleae recording, afterwards starts the test an when the test is done, the saleae recording should stop. So for my setup, it would be nice to control saleae logic 2 with an external program. A python binding would we awesome, but if there is some kind of restapi or like additional command line parameters to use it with pipes, it would be also fine.

So is there a way to remote control Saleae 2 Software?

Solution

This just doesn't work.

I'll accept that the documentation which influenced the decision to buy this solution was flawed and that the HP Smart Array B320i RAID controller is not capable of logical drive expansion, migration or modification.

It's a shame.

In this specific case, I had to rebuild the server in order to add a new disk to the array set.

Comments

[mdpc]

Anyway to dump/restore to a properly initialized physical raid-set and then do an export/import process and move the disks to the target system?

[ewwhite]

@mdpc I don't have another or spare set of disks to work with. This is a pretty routine operation that one would expect to function properly.

[Striker_84]

Battery uncharged or defect by any chance?

[ewwhite]

@Striker_84 It's a Capacitor-backed flash setup. Yes, it's healthy.

[ewwhite]

@Striker_84 Yes, the firmware and software are completely up-to-date. Also see the full configuration output.

[Cutton Eye]

as a matter of fact, I can't see why this is worth to down vote. Maybe someone can enlighten me, why it's a bad question? would appreciate to learn ;).

[Citizen]

That's horrible........