HP Proliant DL360 G7 Wont Boot from USB
20,227
Reboot again. (cold Boot) Press F9 to enter the RBSU Check, if the „USB Boot Support“ is enabled. If not, enable it. Go to „System Options“ > „USB Options“ > „Removable Flash Media Boot Sequence“ and select the proper boot device there. Then select “Standard Boot Order” (IPL) and choose to start from “USB Drive Key (C:)” first.
In Reference to https://seiler.it/red-screen-death-illegal-opcode-error/
Related videos on Youtube
Author by
Patrick Mevzek
Updated on September 18, 2022Comments
-
Patrick Mevzek over 1 year
Whenever I try to boot from a USB stick I get the Red Screen Of Death. I've tried to load VMWare, Windows and Linux from a bootable USB but nothing.
-
Michael Hampton almost 5 yearsDid you just buy this off eBay? Clear the NVRAM first.
-
-
yagmoth555 almost 5 yearsHi, the question state a HP server, can you elebarate on why it could be the same problem than the OP you fixed, thanks!
-
Mikael Dúi Bolinder almost 5 years@yagmoth555 thought everyone knew the MicroServer is a ProLiant...