LSI megaraid - config raid and non-raid
5,010
It turns out you can configure a single disk RAID-0 to implement this.
Related videos on Youtube
11 : 48
LSI MegaRaid SAS Raid Controller .mov
05 : 44
Drive accidentally removed from RAID, resolve the PD Missing error using LSI WebBIOS
02 : 13
LSI megaraid - config raid and non-raid (3 Solutions!!)
04 : 00
MegaRaid WebBios Configuration Step by Step
08 : 30
Raid 5 hard drive failure replacement through megaraid storage manager tool
09 : 27
cài đặt setup Raid LSI 9212-4i
03 : 15
LSI RAID Configuration Problem (Widows detects 2 x hdd, not raid 1)
![Megaraid Storage Manager [MSM] - How to configure Raid Array Online without REBOOT server](https://i.ytimg.com/vi/e2HTonHwVlc/hq720.jpg?sqp=-oaymwEcCNAFEJQDSFXyq4qpAw4IARUAAIhCGAFwAcABBg==&rs=AOn4CLBk5xpU-U5ypWLBXE_R0ktH4rRPaw)
08 : 43
Megaraid Storage Manager [MSM] - How to configure Raid Array Online without REBOOT server
Author by
Neo Ng
Updated on September 18, 2022Comments
-
Neo Ng almost 2 years
I have this configuration of server
- IBM X3650 M4
- IBM ServeRAID M5110e
- 300GB x3 SAS (config as RAID 5)
- 1TB x1 SAS (config as normal disk, non-raid)
- Windows Server 2012 R2 Standard
I would like the system behave like the following:
- OS install in the RAID-5
- Temporary data in the 1TB
I have successfully setup the RAID 5 using the ServerGuide disk. However I cannot find a way to setup the non-raid disk of the 1TB
Can I do this? If not, is there any workaround?