Parsing raw data received from bluetooth HDP device
11,350
Solution 1
I managed to solve the problem. The main issue I had was that I only took one blood pressure reading then kept pressing upload. This does upload some information about the monitor but doesn't include a blood pressure reading. Once I knew this I had a number of other smaller bugs to solve but nothing too complicated. The code for the final working service is below.
public class BluetoothHDPService extends Service {
private static final String TAG = "BluetoothHDPService";
public static final int RESULT_OK = 0;
public static final int RESULT_FAIL = -1;
// Status codes sent back to the UI client.
// Application registration complete.
public static final int STATUS_HEALTH_APP_REG = 100;
// Application unregistration complete.
public static final int STATUS_HEALTH_APP_UNREG = 101;
// Channel creation complete.
public static final int STATUS_CREATE_CHANNEL = 102;
// Channel destroy complete.
public static final int STATUS_DESTROY_CHANNEL = 103;
// Reading data from Bluetooth HDP device.
public static final int STATUS_READ_DATA = 104;
// Done with reading data.
public static final int STATUS_READ_DATA_DONE = 105;
// Message codes received from the UI client.
// Register client with this service.
public static final int MSG_REG_CLIENT = 200;
// Unregister client from this service.
public static final int MSG_UNREG_CLIENT = 201;
// Register health application.
public static final int MSG_REG_HEALTH_APP = 300;
// Unregister health application.
public static final int MSG_UNREG_HEALTH_APP = 301;
// Connect channel.
public static final int MSG_CONNECT_CHANNEL = 400;
// Disconnect channel.
public static final int MSG_DISCONNECT_CHANNEL = 401;
public static final int RECEIVED_SYS = 901;
public static final int RECEIVED_DIA = 902;
public static final int RECEIVED_PUL = 903;
private int count;
private byte[] invoke = {0x00, 0x00};
private BluetoothHealthAppConfiguration mHealthAppConfig;
private BluetoothAdapter mBluetoothAdapter;
private BluetoothHealth mBluetoothHealth;
private BluetoothDevice mDevice;
private int mChannelId;
private Messenger mClient;
// Handles events sent by {@link HealthHDPActivity}.
@SuppressLint("HandlerLeak")
private class IncomingHandler extends Handler {
@Override
public void handleMessage(Message msg) {
switch (msg.what) {
// Register UI client to this service so the client can receive messages.
case MSG_REG_CLIENT:
Log.d(TAG, "Activity client registered");
mClient = msg.replyTo;
break;
// Unregister UI client from this service.
case MSG_UNREG_CLIENT:
mClient = null;
break;
// Register health application.
case MSG_REG_HEALTH_APP:
registerApp(msg.arg1);
break;
// Unregister health application.
case MSG_UNREG_HEALTH_APP:
unregisterApp();
break;
// Connect channel.
case MSG_CONNECT_CHANNEL:
mDevice = (BluetoothDevice) msg.obj;
connectChannel();
break;
// Disconnect channel.
case MSG_DISCONNECT_CHANNEL:
mDevice = (BluetoothDevice) msg.obj;
disconnectChannel();
break;
default:
super.handleMessage(msg);
}
}
}
final Messenger mMessenger = new Messenger(new IncomingHandler());
/**
* Make sure Bluetooth and health profile are available on the Android device. Stop service
* if they are not available.
*/
@SuppressLint("ShowToast")
@Override
public void onCreate() {
super.onCreate();
Log.e("TEST", "HDPService Created");
mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter();
if (mBluetoothAdapter == null || !mBluetoothAdapter.isEnabled()) {
// Bluetooth adapter isn't available. The client of the service is supposed to
// verify that it is available and activate before invoking this service.
stopSelf();
return;
}
if (!mBluetoothAdapter.getProfileProxy(this, mBluetoothServiceListener,
BluetoothProfile.HEALTH)) {
Toast.makeText(this, "bluetooth_health_profile_not_available",
Toast.LENGTH_LONG);
stopSelf();
return;
}
}
@Override
public int onStartCommand(Intent intent, int flags, int startId) {
Log.d(TAG, "BluetoothHDPService is running.");
return START_STICKY;
}
@Override
public IBinder onBind(Intent intent) {
return mMessenger.getBinder();
};
// Register health application through the Bluetooth Health API.
private void registerApp(int dataType) {
Log.e(TAG, "registerApp()");
mBluetoothHealth.registerSinkAppConfiguration(TAG, dataType, mHealthCallback);
}
// Unregister health application through the Bluetooth Health API.
private void unregisterApp() {
Log.e(TAG, "unregisterApp()");
mBluetoothHealth.unregisterAppConfiguration(mHealthAppConfig);
}
// Connect channel through the Bluetooth Health API.
private void connectChannel() {
Log.i(TAG, "connectChannel()");
mBluetoothHealth.connectChannelToSource(mDevice, mHealthAppConfig);
}
// Disconnect channel through the Bluetooth Health API.
private void disconnectChannel() {
Log.i(TAG, "disconnectChannel()");
mBluetoothHealth.disconnectChannel(mDevice, mHealthAppConfig, mChannelId);
}
// Callbacks to handle connection set up and disconnection clean up.
private final BluetoothProfile.ServiceListener mBluetoothServiceListener =
new BluetoothProfile.ServiceListener() {
public void onServiceConnected(int profile, BluetoothProfile proxy) {
if (profile == BluetoothProfile.HEALTH) {
mBluetoothHealth = (BluetoothHealth) proxy;
if (Log.isLoggable(TAG, Log.DEBUG))
Log.d(TAG, "onServiceConnected to profile: " + profile);
}
}
public void onServiceDisconnected(int profile) {
if (profile == BluetoothProfile.HEALTH) {
mBluetoothHealth = null;
}
}
};
private final BluetoothHealthCallback mHealthCallback = new BluetoothHealthCallback() {
// Callback to handle application registration and unregistration events. The service
// passes the status back to the UI client.
public void onHealthAppConfigurationStatusChange(BluetoothHealthAppConfiguration config,
int status) {
if (status == BluetoothHealth.APP_CONFIG_REGISTRATION_FAILURE) {
mHealthAppConfig = null;
sendMessage(STATUS_HEALTH_APP_REG, RESULT_FAIL);
} else if (status == BluetoothHealth.APP_CONFIG_REGISTRATION_SUCCESS) {
mHealthAppConfig = config;
sendMessage(STATUS_HEALTH_APP_REG, RESULT_OK);
} else if (status == BluetoothHealth.APP_CONFIG_UNREGISTRATION_FAILURE ||
status == BluetoothHealth.APP_CONFIG_UNREGISTRATION_SUCCESS) {
sendMessage(STATUS_HEALTH_APP_UNREG,
status == BluetoothHealth.APP_CONFIG_UNREGISTRATION_SUCCESS ?
RESULT_OK : RESULT_FAIL);
}
}
// Callback to handle channel connection state changes.
// Note that the logic of the state machine may need to be modified based on the HDP device.
// When the HDP device is connected, the received file descriptor is passed to the
// ReadThread to read the content.
public void onHealthChannelStateChange(BluetoothHealthAppConfiguration config,
BluetoothDevice device, int prevState, int newState, ParcelFileDescriptor fd,
int channelId) {
Log.e("Read Thread", "Start If Statements");
Log.e("Read Thread", "prevState: " + prevState);
Log.e("Read Thread", "newState: " + newState);
if (Log.isLoggable(TAG, Log.DEBUG))
Log.d(TAG, String.format("prevState\t%d ----------> newState\t%d",
prevState, newState));
// if (prevState != BluetoothHealth.STATE_CHANNEL_CONNECTED &&
// newState == BluetoothHealth.STATE_CHANNEL_CONNECTED) {
if (prevState == BluetoothHealth.STATE_CHANNEL_DISCONNECTED &&
newState == BluetoothHealth.STATE_CHANNEL_CONNECTED) {
if (config.equals(mHealthAppConfig)) {
mChannelId = channelId;
sendMessage(STATUS_CREATE_CHANNEL, RESULT_OK);
Log.e("Read Thread", "Read Start 1");
(new ReadThread(fd)).start();
} else {
Log.e("Read Thread", "Status Create Channel Fail 1");
sendMessage(STATUS_CREATE_CHANNEL, RESULT_FAIL);
}
} else if (prevState == BluetoothHealth.STATE_CHANNEL_CONNECTING &&
newState == BluetoothHealth.STATE_CHANNEL_DISCONNECTED) {
sendMessage(STATUS_CREATE_CHANNEL, RESULT_FAIL);
Log.e("Read Thread", "Status Create Channel Fail 2");
} else if (newState == BluetoothHealth.STATE_CHANNEL_DISCONNECTED) {
if (config.equals(mHealthAppConfig)) {
sendMessage(STATUS_DESTROY_CHANNEL, RESULT_OK);
Log.e("Read Thread", "Status Disconnect OK");
} else {
sendMessage(STATUS_DESTROY_CHANNEL, RESULT_FAIL);
Log.e("Read Thread", "Status Disconnect FAIL");
}
}else if (prevState == BluetoothHealth.STATE_CHANNEL_CONNECTING && newState == BluetoothHealth.STATE_CHANNEL_CONNECTED) {
if (config.equals(mHealthAppConfig)) {
mChannelId = channelId;
sendMessage(STATUS_CREATE_CHANNEL, RESULT_OK);
Log.e("Read Thread", "Read Start 2");
(new ReadThread(fd)).start();
} else {
sendMessage(STATUS_CREATE_CHANNEL, RESULT_FAIL);
Log.e("Read Thread", "Status Create Channel Fail 3");
}
}
}
};
// Sends an update message to registered UI client.
private void sendMessage(int what, int value) {
if (mClient == null) {
Log.d(TAG, "No clients registered.");
return;
}
try {
mClient.send(Message.obtain(null, what, value, 0));
} catch (RemoteException e) {
// Unable to reach client.
e.printStackTrace();
}
}
public String byte2hex(byte[] b){
// String Buffer can be used instead
String hs = "";
String stmp = "";
for (int n = 0; n < b.length; n++){
stmp = (java.lang.Integer.toHexString(b[n] & 0XFF));
if (stmp.length() == 1){
hs = hs + "0" + stmp;
}
else{
hs = hs + stmp;
}
if (n < b.length - 1){
hs = hs + "";
}
}
return hs;
}
public static int byteToUnsignedInt(byte b) {
return 0x00 << 24 | b & 0xff;
}
public static int toInt(byte[] bytes) {
int ret = 0;
for (int i=0; i<4 && i<bytes.length; i++) {
ret <<= 8;
ret |= (int)bytes[i] & 0xFF;
}
return ret;
}
// Thread to read incoming data received from the HDP device. This sample application merely
// reads the raw byte from the incoming file descriptor. The data should be interpreted using
// a health manager which implements the IEEE 11073-xxxxx specifications.
private class ReadThread extends Thread {
private ParcelFileDescriptor mFd;
public ReadThread(ParcelFileDescriptor fd) {
super();
mFd = fd;
}
@Override
public void run() {
Log.e("TEST", "Read Data 1");
FileInputStream fis = new FileInputStream(mFd.getFileDescriptor());
final byte data[] = new byte[200];
Log.i(TAG, "Read Data 2");
try {
while(fis.read(data) > -1) {
// At this point, the application can pass the raw data to a parser that
// has implemented the IEEE 11073-xxxxx specifications. Instead, this sample
// simply indicates that some data has been received.
Log.i(TAG, "INBOUND");
String test = byte2hex(data);
Log.i(TAG, test);
if (data[0] != (byte) 0x00)
{
if(data[0] == (byte) 0xE2){
Log.i(TAG, "E2 - Association Request");
count = 1;
(new WriteThread(mFd)).start();
try {
sleep(100);
} catch (InterruptedException e) {
e.printStackTrace();
}
count = 2;
(new WriteThread(mFd)).start();
}
else if (data[0] == (byte)0xE7){
Log.i(TAG, "E7 - Data Given");
if(data[3] != (byte)0xda){
invoke[0] = data[6];
invoke[1] = data[7];
Log.i(TAG, "E7 - Reading?");
ByteBuffer sys = ByteBuffer.allocate(2);
sys.order(ByteOrder.LITTLE_ENDIAN);
sys.put(data[45]);
sys.put(data[46]);
short sysVal = sys.getShort(0);
Log.i(TAG, " Sys - "+sysVal);
ByteBuffer dia = ByteBuffer.allocate(2);
dia.order(ByteOrder.LITTLE_ENDIAN);
dia.put(data[47]);
dia.put(data[48]);
short diaVal = dia.getShort(0);
Log.i(TAG, " Dia - "+diaVal);
sendMessage(9919, diaVal);
sendMessage(9920, sysVal);
for(int i=0; i<(data.length-2); i++){
ByteBuffer bb = ByteBuffer.allocate(2);
bb.order(ByteOrder.LITTLE_ENDIAN);
bb.put(data[i]);
bb.put(data[i+1]);
short shortVal = bb.getShort(0);
Log.i(TAG, i+" Short Val - "+shortVal);
}
count = 3;
//set invoke id so get correct response
(new WriteThread(mFd)).start();
}
//parse data!!
}
else if (data[0] == (byte) 0xE4)
{
//count = 4;
// (new WriteThread(mFd)).start();
}
//zero out the data
for (int i = 0; i < data.length; i++){
data[i] = (byte) 0x00;
}
}
sendMessage(STATUS_READ_DATA, 0);
}
} catch(IOException ioe) {}
if (mFd != null) {
try {
mFd.close();
} catch (IOException e) { /* Do nothing. */ }
}
sendMessage(STATUS_READ_DATA_DONE, 0);
}
}
private class WriteThread extends Thread {
private ParcelFileDescriptor mFd;
public WriteThread(ParcelFileDescriptor fd) {
super();
mFd = fd;
}
@Override
public void run() {
FileOutputStream fos = new FileOutputStream(mFd.getFileDescriptor());
final byte data_AR[] = new byte[] { (byte) 0xE3, (byte) 0x00,
(byte) 0x00, (byte) 0x2C,
(byte) 0x00, (byte) 0x00,
(byte) 0x50, (byte) 0x79,
(byte) 0x00, (byte) 0x26,
(byte) 0x80, (byte) 0x00, (byte) 0x00, (byte) 0x00,
(byte) 0x80, (byte) 0x00,
(byte) 0x80, (byte) 0x00, (byte) 0x00, (byte) 0x00,
(byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00,
(byte) 0x80, (byte) 0x00, (byte) 0x00, (byte) 0x00,
(byte) 0x00, (byte) 0x08, //bt add for phone, can be automate in the future
(byte) 0x3C, (byte) 0x5A, (byte) 0x37, (byte) 0xFF,
(byte) 0xFE, (byte) 0x95, (byte) 0xEE, (byte) 0xE3,
(byte) 0x00, (byte) 0x00,
(byte) 0x00, (byte) 0x00,
(byte) 0x00, (byte) 0x00,
(byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00};
final byte data_DR[] = new byte[] { (byte) 0xE7, (byte) 0x00,
(byte) 0x00, (byte) 0x12,
(byte) 0x00, (byte) 0x10,
(byte) 0x00, (byte) 0x24,
(byte) 0x02, (byte) 0x01,
(byte) 0x00, (byte) 0x0A,
(byte) 0x00, (byte) 0x00,
(byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00,
(byte) 0x0D, (byte) 0x1D,
(byte) 0x00, (byte) 0x00 };
final byte get_MDS[] = new byte[] { (byte) 0xE7, (byte) 0x00,
(byte) 0x00, (byte) 0x0E,
(byte) 0x00, (byte) 0x0C,
(byte) 0x00, (byte) 0x24,
(byte) 0x01, (byte) 0x03,
(byte) 0x00, (byte) 0x06,
(byte) 0x00, (byte) 0x00,
(byte) 0x00, (byte) 0x00,
(byte) 0x00, (byte) 0x00 };
final byte data_RR[] = new byte[] { (byte) 0xE5, (byte) 0x00,
(byte) 0x00, (byte) 0x02,
(byte) 0x00, (byte) 0x00 };
// final byte data_RRQ[] = new byte[] { (byte) 0xE4, (byte) 0x00,
// (byte) 0x00, (byte) 0x02,
// (byte) 0x00, (byte) 0x00 };
//
// final byte data_ABORT[] = new byte[] { (byte) 0xE6, (byte) 0x00,
// (byte) 0x00, (byte) 0x02,
// (byte) 0x00, (byte) 0x00 };
try {
Log.i(TAG, String.valueOf(count));
if (count == 1)
{
fos.write(data_AR);
Log.i(TAG, "Association Responded!");
}
else if (count == 2)
{
fos.write(get_MDS);
Log.i(TAG, "Get MDS object attributes!");
}
else if (count == 3)
{
fos.write(data_DR);
Log.i(TAG, "Data Responsed!");
}
else if (count == 4)
{
fos.write(data_RR);
Log.i(TAG, "Data Released!");
}
} catch(IOException ioe) {}
}
}
}
Solution 2
@ Jieqin - great that you got it too :)
paste this in your reading thread under the block of
else if (data[0] == (byte)0xE7){
Log.i(TAG, "E7");
//work for legacy device...
if (data[18] == (byte) 0x0d && data[19] == (byte) 0x1d) //fixed report
to parse your agents answer - and if it works, please rate my hints :)
else if (data[18] == (byte) 0x0d && data[19] == (byte) 0x1f) //mp var report
{
count = 999;
//set invoke id so get correct response
invoke = new byte[] { data[6], data[7] };
//write back response
(new WriteThread(mFd)).start();
//parse data!!
int length = data[21];
Log.i(TAG, "length is " + length);
// check data-req-id
int report_no = data[25];
int number_of_data_packets = data[29];
//packet_start starts from handle 0 byte
int packet_start = 36;
final int SYS_DIA_MAP_DATA = 1;
final int PULSE_DATA = 2;
final int STATUS = 3;
for (int i = 0; i < number_of_data_packets; i++)
{
int obj_handle = data[packet_start+1];
switch (obj_handle)
{
case SYS_DIA_MAP_DATA:
int sys = byteToUnsignedInt(data[packet_start+9]);
int dia = byteToUnsignedInt(data[packet_start+11]);
int map = byteToUnsignedInt(data[packet_start+13]);
Log.i(TAG, "sys is "+ sys);
sendMessage(RECEIVED_SYS, sys);
Log.i(TAG, "dia is "+ dia);
sendMessage(RECEIVED_DIA, dia);
Log.i(TAG, "map is "+ map);
break;
case PULSE_DATA:
//parse
int pulse = byteToUnsignedInt(data[packet_start+5]);
Log.i(TAG, "pulse is " + pulse);
sendMessage(RECEIVED_PUL, pulse);
break;
case STATUS:
//need more signal
Log.i(TAG, "STATUS");
break;
}
packet_start += byteToUnsignedInt(data[packet_start+3]) + 4; //4 = ignore beginning four bytes
}
}
Solution 3
afaik you have to choose between automatic or push upload.
if automatic is working and you can read the data, then just disable auto upload and push the data via the upload button to your device directly after a measurenment...
regards
Solution 4
The data buffer contains 2byte values and 4byte values. Probably shorts and ints as you can see in the pdf. Do you account for that?
0xE7 0x00 APDU CHOICE Type (PrstApdu)
0x00 0x84 CHOICE.length= 132
0x00 0x82 OCTET STRING.length = 130
0x00 0x01 invoke-id (differentiates this message from any other outstanding)
0x01 0x01 CHOICE (Remote Operation Invoke | Confirmed Event Report)
0x00 0x7C CHOICE.length = 124
0x00 0x00 obj-handle = 0 (MDS object)
0x00 0x00 0x10 0x15 event-time (set to 0xFFFFFFFF if RelativeTime is not supported)
0x0D 0x1C event-type = MDC_NOTI_CONFIG
Author by
TrueWheel
Updated on June 11, 2022Comments
-
TrueWheel almost 2 years
I am trying to read data from an Omron 708-BT Blood Pressure Monitor which is certified by the continua health alliance. I am following this example of a Bluetooth HDP App. I am managing to connect to the device and retrieve data in byte format but cannot parse the data to get the values needed. I am trying to follow the IEEE Blood Pressure specification specified on page 19 of this PDF.
Here is the code which has been added to the example code linked above.
//Variables in the class private int count; private byte[] invoke = {0x00, 0x00}; private class ReadThread extends Thread { private ParcelFileDescriptor mFd; public ReadThread(ParcelFileDescriptor fd) { super(); mFd = fd; } @Override public void run() { FileInputStream fis = new FileInputStream(mFd.getFileDescriptor()); final byte data[] = new byte[300]; try { while(fis.read(data) > -1) { // At this point, the application can pass the raw data to a parser that // has implemented the IEEE 11073-xxxxx specifications. Instead, this sample // simply indicates that some data has been received Log.e("Test", data.toString()); if (data[0] != (byte) 0x00) { String test = byte2hex(data); Log.i(TAG, test); if(data[0] == (byte) 0xE2){ Log.i(TAG, "E2"); count = 1; (new WriteThread(mFd)).start(); try { sleep(100); } catch (InterruptedException e) { e.printStackTrace(); } Log.i(TAG, "Seconds Write Thread"); count = 2; (new WriteThread(mFd)).start(); } else if (data[0] == (byte)0xE7){ Log.i(TAG, "E7"); count = 3; //set invoke id so get correct response invoke = new byte[] { data[6], data[7] }; (new WriteThread(mFd)).start(); //parse data!! int number_of_data_packets = data[25]; int packet_start = 30; final int SYS_DIA_MAP_DATA = 1; final int PULSE_DATA = 2; final int ERROR_CODE_DATA = 3; for (int i = 0; i < number_of_data_packets; i++){ Log.e("TEST", Integer.toString(i)); int obj_handle = data[packet_start+1]; switch (obj_handle) { case SYS_DIA_MAP_DATA: int sys = byteToUnsignedInt(data[packet_start+9]); int dia = byteToUnsignedInt(data[packet_start+11]); int map = byteToUnsignedInt(data[packet_start+13]); //create team string... 9+13~9+20 Log.e("RESULT", "sys is "+ sys); sendMessage(RECEIVED_SYS, sys); Log.e("RESULT", "dia is "+ dia); sendMessage(RECEIVED_DIA, dia); Log.e("RESULT", "map is "+ map); break; case PULSE_DATA: //parse int pulse = byteToUnsignedInt(data[packet_start+5]); Log.e("RESULT", "pulse is " + pulse); sendMessage(RECEIVED_PUL, pulse); break; case ERROR_CODE_DATA: //need more signal break; } packet_start += 1;//4 + data[packet_start+3]; //4 = ignore beginning four bytes } } else if (data[0] == (byte) 0xE4) { count = 4; (new WriteThread(mFd)).start(); } //zero out the data for (int i = 0; i < data.length; i++){ data[i] = (byte) 0x00; } } sendMessage(STATUS_READ_DATA, 0); } } catch(IOException ioe) {} if (mFd != null) { try { mFd.close(); } catch (IOException e) { /* Do nothing. */ } } sendMessage(STATUS_READ_DATA_DONE, 0); } } private class WriteThread extends Thread { private ParcelFileDescriptor mFd; public WriteThread(ParcelFileDescriptor fd) { super(); mFd = fd; } @Override public void run() { FileOutputStream fos = new FileOutputStream(mFd.getFileDescriptor()); final byte data_AR[] = new byte[] { (byte) 0xE3, (byte) 0x00, (byte) 0x00, (byte) 0x2C, (byte) 0x00, (byte) 0x00, (byte) 0x50, (byte) 0x79, (byte) 0x00, (byte) 0x26, (byte) 0x80, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x80, (byte) 0x00, (byte) 0x80, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x80, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x08, //bt add for phone, can be automate in the future (byte) 0x3C, (byte) 0x5A, (byte) 0x37, (byte) 0xFF, (byte) 0xFE, (byte) 0x95, (byte) 0xEE, (byte) 0xE3, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00}; final byte data_DR[] = new byte[] { (byte) 0xE7, (byte) 0x00, (byte) 0x00, (byte) 0x12, (byte) 0x00, (byte) 0x10, (byte) invoke[0], (byte) invoke[1], (byte) 0x02, (byte) 0x01, (byte) 0x00, (byte) 0x0A, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x0D, (byte) 0x1D, (byte) 0x00, (byte) 0x00 }; final byte get_MDS[] = new byte[] { (byte) 0xE7, (byte) 0x00, (byte) 0x00, (byte) 0x0E, (byte) 0x00, (byte) 0x0C, (byte) 0x00, (byte) 0x24, (byte) 0x01, (byte) 0x03, (byte) 0x00, (byte) 0x06, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00, (byte) 0x00 }; final byte data_RR[] = new byte[] { (byte) 0xE5, (byte) 0x00, (byte) 0x00, (byte) 0x02, (byte) 0x00, (byte) 0x00 }; final byte data_RRQ[] = new byte[] { (byte) 0xE4, (byte) 0x00, (byte) 0x00, (byte) 0x02, (byte) 0x00, (byte) 0x00 }; final byte data_ABORT[] = new byte[] { (byte) 0xE6, (byte) 0x00, (byte) 0x00, (byte) 0x02, (byte) 0x00, (byte) 0x00 }; try { Log.i(TAG, String.valueOf(count)); if (count == 1) { fos.write(data_AR); Log.i(TAG, "Association Responded!"); } else if (count == 2) { fos.write(get_MDS); Log.i(TAG, "Get MDS object attributes!"); } else if (count == 3) { fos.write(data_DR); Log.i(TAG, "Data Responsed!"); } else if (count == 4) { fos.write(data_RR); Log.i(TAG, "Data Released!"); } } catch(IOException ioe) {} }The hex representation of the data is the following. I believe this data hold the values from the blood pressure values but may be wrong. The only reason I believe this is because in the PDF linked above it days the data will start with the hex value e7.
03-23 20:14:44.186: I/BluetoothHDPService(23652): 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