Tenda F303 not working after firmware upgrade

Question

I have a tenda F303 and I needed to port forward a game but on the internet I seen that I need to upgrade the firmware to port forward and some more things.I opened www.tendacn.com and I searched my router model and I pressed the download button and selected the upgrade.I opened my router settings tab and I pressed to upgrade I selected the corect file and I started the process.The router rebooted in the login screen (192.168.0.1/login.asp) but the page was blank.I tryed to reset the router from the reset button from the back of the case but didn't work.I need help as quick as you can!Thanks!

Solution

I upgraded to V11.13.01.23_EN from V11.13.01.06_EN and had the same issue.
The web page of the router wouldn't open.
I disconnected the power and all the data (ethernet) cables. Connected the power cable and hold the WPS/Reset button for good two minutes.
Router restart couple times, then I connected my laptop with the patch cord. This helped, I can login into the router again. Hope this helps!

Comments

[acejavelin]

Are you sure you followed the reset procedure correctly? microcenter.com/tech_center/article/7995/…

[Aleksss]

Yes I did that.

[Aleksss]

But didn't work

[Andrew Morton]

I can suggest (1) leaving it unpowered for a whole minute, (2) using an Ethernet cable to connect to it, and (3) using 192.168.0.1 without the "login.asp" - they might have changed the name of the page.

[Aleksss]

when I type 192.168.0.1 and press ENTER it automaticaly add /login.asp to the adress.And I use ethernet cable for the wan and my computer is connected with cable but I also I tryed wireless connection.

[Jubayer Arefin]

Followed the process exactly and it worked like a charm.

[Prabhat Yadav]

How you connect with the patch cord?