TP Link TD-W8968 how to view data statistics based on ip
Solution 1
The hardware version of your modem router is V3 where as you are checking the document of hardware V1. Please have a look on the document of V3 hardware. It seems that the feature is not available with hardware V3.
Solution 2
How do I view data statistics on TP Link TD-W8968 router?
4.19.10 Statistics
Choose menu "System Tools" → "Statistics", and then you can view the statistics of the modem router, including total traffic and current traffic of the last Packets Statistic Interval.
Statistics Status:
Enable or Disable. The default value is disabled. To enable it, click the Enable . If it is disabled, the function of DoS protection in Security settings will be disabled.
Statistics Interval (5-60):
The default value is 10. Select a value between 5 and 60 seconds in the drop-down list. The Packets Statistic interval indicates the time section of the packets statistic.
Click Reset All to reset the values of all the entries to zero.
Click Delete All to delete all entries in the table.
Click the Refresh button to refresh immediately.
Statistics Table:
Source User Manual, p94:
I am not able to find the menu "System Tools
What I have is Device Info, Quick Setup, Operation Mode, Advance Setup, IPTV, Wireless, Guest Network, USB Settings, Diagnostics, Management, Logout."
Try looking "Device Info" > "Statistics" > "LAN"
Note:
- You may have firmware that is newer than the v1.0 in the linked user manual with a different menu layout.
- You may have firmware that is for a specific market or ISP that doesn't log this information.
Related videos on Youtube
happyhardik
Updated on September 18, 2022Comments
-
happyhardik over 1 year
I have a tp link modem and multiple device connected to it. I want to see which device is eating up all the bandwidth and crossing my data limit. How can I see that?
I have my mobile phone, pc, laptop, tablet all connected to it. If I can see which device used how much bandwidth or total data, I can judge by that. Not sure if this is the right place to ask this question.
-
happyhardik about 9 yearsI am not able to find the menu "System Tools". What I have is Device Info, Quick Setup, Operation Mode, Advance Setup, IPTV, Wireless, Guest Network, USB Settings, Diagnostics, Management, Logout. That's it.
-
DavidPostill about 9 years@happyhardik Try looking under "Device Info" -> "Statistics" -> "Lan". See updated answer.
-
happyhardik about 9 yearsOk, that one shows how much transferred through WLAN0 (Wireless), but doesn't show which device did it or which IP did it.
-
happyhardik about 9 yearsFirmware Version: 1.0.5 Build 140821 Rel.52209
-
DavidPostill about 9 years<Shrug>. I've no idea why your TP Link TD-W8968 is so different compared to the manual. Are you sure about the model number?
-
happyhardik about 9 yearsMight be because I have an Indian version of it? The model is correct with ipv6 support and a usb port for printer and 3G modem.
-
happyhardik about 9 yearsIt seems I have the latest firmware: Firmware Version: 1.0.5 Build 140821 Rel.52209 Hardware Version: TD-W8968 V3 0x00000001
-
DavidPostill about 9 yearsNo more ideas, other than you could see if one of the alternate firmwares like openwrt or dd-wrt will have the stats you need.
-
happyhardik about 9 yearsSo, it seems that Indians are provided with a cut down version of the hardware and software to reduce the cost. :(