xenserver - xe-toolstack restart - i lost connection from xencenter
xe toolstack-restart
will always cut your xencenter connection. (but the vm continue to run correctly on the host)
Please log in normal console (iDRAC, iLO, etc..), as that mean your XAPI can't restart and your server state is unknown.
I would check with dmesg
or in /var/log
for xensource.log
for any errors.
Related videos on Youtube
Jobish Jose
Updated on September 18, 2022Comments
-
Jobish Jose over 1 year
After Xencenter-toolstack restart i lost connection from xencenter
I try to restart using ssh - putty following message is showing and i lost the browser access also ............
All xe command is not working and postponed on ssh ....
@xs01p04 log]# xe-toolstack-restart Stopping xapi: [ OK ]
Stopping the v6 licensing daemon: [ OK ]
Stopping the memory ballooning daemon: [ OK ]
Stopping perfmon: [FAILED]
Stopping the xenopsd daemon: [ OK ]
Stopping the XCP RRDD daemon: [ OK ]
Stopping the XCP networking daemon: [ OK ]
Stopping the fork/exec daemon: [ OK ]
Starting the fork/exec daemon: [ OK ]
Starting the XCP networking daemon: . [ OK ]
Starting the XCP RRDD daemon: [ OK ]
Starting the xenopsd daemon: [ OK ]
Starting perfmon: [ OK ]
Starting the memory ballooning daemon: [ OK ]
Starting the v6 licensing daemon: [ OK ]
Starting xapi: OK [ OK ]Thank Advance ...
Update #1
@yagmoth555
1) i try to migrate one vm to another storage location that time some unexpected error occurred and yello state is appear Then i create new vm from snapshot
Dead vm still there
After one week 2) yesterday i try to reboot a vm and its again yellow state ( its not previous one)
Then i try to restart xentoolstack from xencenter after few minute i lost xencenter connection I cannot connect through xencenter
But https:ip is appearing
Then i login through ssh and restart toollstack through command line After that i lost http acess also
Nom XE command is hanged up but Vm are still working
Update #2 @yagmoth555 Thanks advance
tail -n 15 /var/log/messages
Oct 16 20:08:30 xs01p04 ovsdb-server: 01993|reconnect|INFO|ssl:10.101.2.52:6632: waiting 8 seconds before reconnect
Oct 16 20:08:33 xs01p04 fe: 26045 (/usr/bin/ovs-appctl bond/show bond2) exitted with code 2
Oct 16 20:08:33 xs01p04 xcp-networkd: [error|xs01p04|1|monitor_thread|network_utils] Call '/usr/bin/ovs-appctl bond/show bond2' exited with code 2 [stdout = ''; stderr = 'no such bond ovs-appctl: ovs-vswitchd: server returned reply code 501 ']
Oct 16 20:08:38 xs01p04 ovsdb-server: 01994|reconnect|INFO|ssl:10.101.2.52:6632: connecting...
Oct 16 20:08:38 xs01p04 ovsdb-server: 01995|reconnect|WARN|ssl:10.101.2.52:6632: connection attempt failed (No route to host)
Oct 16 20:08:38 xs01p04 ovsdb-server: 01996|reconnect|INFO|ssl:10.101.2.52:6632: waiting 8 seconds before reconnect
Oct 16 20:08:38 xs01p04 fe: 26054 (/usr/bin/ovs-appctl bond/show bond2) exitted with code 2 Oct 16 20:08:38 xs01p04 xcp-networkd: [error|xs01p04|1|monitor_thread|network_utils] Call '/usr/bin/ovs-appctl bond/show bond2' exited with code 2 [stdout = ''; stderr = 'no such bond ovs-appctl: ovs-vswitchd: server returned reply code 501 ']
Oct 16 20:08:43 xs01p04 fe: 26063 (/usr/bin/ovs-appctl bond/show bond2) exitted with code 2
Oct 16 20:08:43 xs01p04 xcp-networkd: [error|xs01p04|1|monitor_thread|network_utils] Call '/usr/bin/ovs-appctl bond/show bond2' exited with code 2 [stdout = ''; stderr = 'no such bond ovs-appctl: ovs-vswitchd: server returned reply code 501 ']
Oct 16 20:08:46 xs01p04 ovsdb-server: 01997|reconnect|INFO|ssl:10.101.2.52:6632: connecting...
Oct 16 20:08:46 xs01p04 ovsdb-server: 01998|reconnect|WARN|ssl:10.101.2.52:6632: connection attempt failed (No route to host)
Oct 16 20:08:46 xs01p04 ovsdb-server: 01999|reconnect|INFO|ssl:10.101.2.52:6632: waiting 8 seconds before reconnect
Oct 16 20:08:48 xs01p04 fe: 26081 (/usr/bin/ovs-appctl bond/show bond2) exitted with code 2
Oct 16 20:08:48 xs01p04 xcp-networkd: [error|xs01p04|1|monitor_thread|network_utils] Call '/usr/bin/ovs-appctl bond/show bond2' exited with code 2 [stdout = ''; stderr = 'no such bond ovs-appctl: ovs-vswitchd: server returned reply code 501 ']
Update #3 @yagmoth555 Thanks advance
xe-toolstack-restart Stopping xapi: [ OK ]Stopping the v6 licensing daemon: [ OK ]
Stopping the memory ballooning daemon: [ OK ]
Stopping perfmon: [FAILED]
Stopping the xenopsd daemon: [ OK ]
Stopping the XCP RRDD daemon: [ OK ]
Stopping the XCP networking daemon: [ OK ]
Stopping the fork/exec daemon: [ OK ]
Starting the fork/exec daemon: [ OK ]
Starting the XCP networking daemon: . [ OK ]
Starting the XCP RRDD daemon: [ OK ]
Starting the xenopsd daemon: [ OK ]
Starting perfmon: [ OK ]
Starting the memory ballooning daemon: [ OK ]
Starting the v6 licensing daemon: [ OK ]
Starting xapi: OK [ OK ]
service xapissl restart
which: no stunnel4 in (/sbin:/usr/sbin:/bin:/usr/bin) Stopping xapi SSL: Starting xapi SSL:
-
yagmoth555 over 8 yearsDid you closed both VM, and simply rebooted the server first ?
-
Jobish Jose over 8 years@ yagmoth555 , I rebooted sever still XE-command sill frorzen and only one vm is automatically up and ............................. I can see only one vm by domain_lis command ....................... xencenter is not connecting
-
yagmoth555 over 8 yearsstart by doing a df -m via the console/ssh on the host, is the disk is full ?
-
Jobish Jose over 8 yearsdisk is not full only 79% ...................
-
yagmoth555 over 8 yearsYour state.db is probably corrupt then. cd /var/xapi, check the file timestamp, if old, it's corrupt. if so, mv state.db state.db_bak, after service xapi restart
-
Jobish Jose over 8 yearsI did but its same ... after xapapi restart, state.db not automatically generating .... ...
-
yagmoth555 over 8 yearsjust seen your new log, never seen that error. I would do xe-switch-network-backend bridge to disable openvswitch, but it's a guess at this point.
-
yagmoth555 over 8 yearsafter all that, if your data is on a different partition I would re-install xen over your install without touching the vm storage location, and re-join the member to the pool. be sure to have backup of the vm
-
-
Jobish Jose over 8 yearsBrother , Thanks for your replay .. ,,,,, I can acess server through ssh and i can access all vm ........ can you explain little bit more i am not familiar in xenserver ....
-
yagmoth555 over 8 years@JobishJose The toolstack-restart cut the comminucation with the console (but the vm continue to work), but usually you can reconnect back some minute later with xencenter when the service restart. I would check dmesg to check if a error occurred somewhere. (or xensource.log in /var/log)