Can't connect to WiFi after suspend
Solution 1
From ubuntuforums:
Type these lines of code in the terminal one at a time:
sudo touch /etc/pm/sleep.d/wakenet.sh
sudo chmod +x /etc/pm/sleep.d/wakenet.sh
sudo gedit /etc/pm/sleep.d/wakenet.sh
Then in the Gedit window that opens up, copy paste this text and press save.
#!/bin/bash
case "$1" in
thaw|resume)
sudo nmcli nm sleep false
sudo pkill -f wpa_supplicant
;;
*)
;;
esac
exit $?
Hope that helps.
Solution 2
Try the below command and restart the network manager,
sudo service dbus restart
sudo service network-manager restart
Solution 3
I don’t know about programming but i had this issue and to make it work I just needed to unchecked the automatically connect to this network when available box , and check the allow all users to connect to this network box all this is in the network connections--> edit connections --> general
Related videos on Youtube
onepiece
Updated on September 18, 2022Comments
-
onepiece almost 2 years
After resuming from suspend, the Network Manager detects my WiFi signal, but eventually gives up when trying to connect to it.
These fixes did not work:
$ sudo restart network-manager $ sudo nmcli nm sleep false $ sudo bash -c 'echo SUSPEND_MODULES=\"iwlwifi\" > /etc/pm/config.d/config'
Below are outputs of
dmesg | tail -30
in three situations.When laptop is turned on, WiFi is connected and working.
$ dmesg | tail -30 [ 6.479195] nouveau [ CLK][0000:01:00.0] 0f: core 270-835 MHz memory 2000 MHz [ 6.479339] nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 324 MHz [ 6.511984] vga_switcheroo: enabled [ 6.512140] [TTM] Zone kernel: Available graphics memory: 4034782 kiB [ 6.512142] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 6.512143] [TTM] Initializing pool allocator [ 6.512146] [TTM] Initializing DMA pool allocator [ 6.512154] nouveau [ DRM] VRAM: 2048 MiB [ 6.512155] nouveau [ DRM] GART: 1048576 MiB [ 6.512159] nouveau [ DRM] TMDS table version 2.0 [ 6.512160] nouveau [ DRM] DCB version 4.0 [ 6.512162] nouveau [ DRM] DCB outp 00: 02010300 00000000 [ 6.512164] nouveau [ DRM] DCB conn 00: 00000400 [ 6.513365] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.513366] [drm] No driver support for vblank timestamp query. [ 6.513376] nouveau [ DRM] ACPI backlight interface available, not registering our own [ 6.524228] nouveau [ DRM] MM: using COPY for buffer copies [ 6.534906] nouveau 0000:01:00.0: No connectors reported connected with modes [ 6.534907] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.565439] nouveau [ DRM] allocated 1024x768 fb: 0x80000, bo ffff880252922800 [ 6.565572] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device [ 6.565597] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 1 [ 6.867191] init: plymouth-upstart-bridge main process ended, respawning [ 6.871109] init: plymouth-upstart-bridge main process ended, respawning [ 14.819661] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 14.819773] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 34.230079] audit_printk_skb: 153 callbacks suppressed [ 34.230081] type=1400 audit(1420504569.736:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2606 comm="apparmor_parser" [ 34.230086] type=1400 audit(1420504569.736:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2606 comm="apparmor_parser" [ 34.230384] type=1400 audit(1420504569.736:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2606 comm="apparmor_parser"
Right after resuming from suspend, when Network Manager is trying to connect. WiFi icon is flashing.
$ dmesg | tail -30 [ 5835.278403] wlan0: authenticated [ 5835.281414] wlan0: associate with 20:aa:4b:71:61:ef (try 1/3) [ 5835.389401] wlan0: associate with 20:aa:4b:71:61:ef (try 2/3) [ 5835.429510] wlan0: associate with 20:aa:4b:71:61:ef (try 3/3) [ 5835.463202] wlan0: association with 20:aa:4b:71:61:ef timed out [ 5835.981063] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 5835.981273] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 5836.451345] wlan0: authenticate with 20:aa:4b:71:61:ef [ 5836.455839] wlan0: send auth to 20:aa:4b:71:61:ef (try 1/3) [ 5836.458444] wlan0: authenticated [ 5836.460831] wlan0: associate with 20:aa:4b:71:61:ef (try 1/3) [ 5836.568785] wlan0: associate with 20:aa:4b:71:61:ef (try 2/3) [ 5836.571480] wlan0: RX AssocResp from 20:aa:4b:71:61:ef (capab=0x411 status=1 aid=5) [ 5836.571487] wlan0: 20:aa:4b:71:61:ef denied association (code=1) [ 5837.236668] wlan0: deauthenticating from 20:aa:4b:71:61:ef by local choice (reason=3) [ 5838.717178] wlan0: authenticate with 20:aa:4b:71:61:ef [ 5838.721191] wlan0: send auth to 20:aa:4b:71:61:ef (try 1/3) [ 5838.723777] wlan0: authenticated [ 5838.727683] wlan0: associate with 20:aa:4b:71:61:ef (try 1/3) [ 5838.751269] wlan0: RX AssocResp from 20:aa:4b:71:61:ef (capab=0x411 status=0 aid=5) [ 5838.755381] wlan0: associated [ 5841.893920] wlan0: deauthenticated from 20:aa:4b:71:61:ef (Reason: 2) [ 5841.901569] cfg80211: Calling CRDA to update world regulatory domain [ 5841.906314] cfg80211: World regulatory domain updated: [ 5841.906319] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5841.906323] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5841.906326] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5841.906328] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5841.906330] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5841.906333] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
A minute or so after the above state, it stops trying to connect. WiFi icon is empty. A notification pops up saying "Disconnected - you are now offline".
$ dmesg | tail -30 [ 5932.449208] wlan0: authenticate with 20:aa:4b:71:61:ef [ 5932.452768] wlan0: send auth to 20:aa:4b:71:61:ef (try 1/3) [ 5932.455454] wlan0: authenticated [ 5932.456978] wlan0: associate with 20:aa:4b:71:61:ef (try 1/3) [ 5932.480497] wlan0: RX AssocResp from 20:aa:4b:71:61:ef (capab=0x411 status=0 aid=5) [ 5932.484791] wlan0: associated [ 5935.611797] wlan0: deauthenticated from 20:aa:4b:71:61:ef (Reason: 2) [ 5935.625479] cfg80211: Calling CRDA to update world regulatory domain [ 5935.630150] cfg80211: World regulatory domain updated: [ 5935.630156] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5935.630159] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5935.630162] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5935.630164] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5935.630167] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5935.630169] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5947.144676] wlan0: authenticate with 20:aa:4b:71:61:ef [ 5947.148096] wlan0: send auth to 20:aa:4b:71:61:ef (try 1/3) [ 5947.150573] wlan0: authenticated [ 5947.153610] wlan0: associate with 20:aa:4b:71:61:ef (try 1/3) [ 5947.177143] wlan0: RX AssocResp from 20:aa:4b:71:61:ef (capab=0x411 status=0 aid=5) [ 5947.181446] wlan0: associated [ 5950.313613] wlan0: deauthenticated from 20:aa:4b:71:61:ef (Reason: 2) [ 5950.323551] cfg80211: Calling CRDA to update world regulatory domain [ 5950.328210] cfg80211: World regulatory domain updated: [ 5950.328215] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5950.328219] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5950.328221] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5950.328224] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5950.328226] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5950.328228] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
-
Admin over 9 yearsAfter going through suspend and failing to connect, what does this command in terminal tell
dmesg | tail -30
-
Admin over 9 years@Jeremy31 I added output of
dmesg | tail -30
in different three situations
-
-
onepiece over 9 years
sudo service dbus restart
turned my screen black and my cursor into a black "X" with a white outline -
onepiece over 9 yearsUnfortunately, this didn't work.
-
Parto over 9 yearsEven after rebooting?
-
onepiece over 9 yearsI tried this modification and it solved the issue: add
sudo
beforenmcli nm sleep false
andpkill -f wpa_supplicant
. -
Parto over 9 yearsCool. Let me edit the answer and include that.
-
Matt G about 7 yearsRunning the second command (
sudo service network-manager restart
) fixed it for me