How to cross-compile for RasPi3

Question

I am currently trying to cross-compile Qt 5.7 for my Raspberry Pi 3. This is my first cross-compiling atempt, so please be kind. :)

On the Qt Wiki I found instructions for the Raspberry Pi 2, which I am currently trying to adapt.

The compile line for RasPi 2 is as follows:

./configure -release -opengl es2 -device linux-rasp-pi2-g++ -device-option \
CROSS_COMPILE=~/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf- \
-sysroot ~/raspi/sysroot -opensource -confirm-license -make libs \
-prefix /usr/local/qt5pi -extprefix ~/raspi/qt5pi -hostprefix ~/raspi/qt5 -v

I replaced the option

-device linux-rasp-pi2-g++

by

-device linux-rpi3-g++

as I found within the raspi-tools folder.

Now I am stuck at the option

CROSS_COMPILE=~/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf-

as in the ~/raspi/tools/ folder I cannot see any obviously raspi3-related entry. There is only the arm-bcm2708/ folder. Shouldn't there be some bcm2837 entry? Does that mean there is no support for RasPi 3 yet or am I missing something?

Thank you for any hints.

Solution

After much struggle (the accepted solution does not work for me), I finally got to cross compile qt 5.6 for raspberry pi 3 on ubuntu. You basically need to follow this well known how to. Just be sure to use the following configure:

./configure -release -opengl es2 -device linux-rpi3-g++
-device-option CROSS_COMPILE=~/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf- -sysroot ~/raspi/sysroot -prefix /usr/local/qt5pi -extprefix ~/raspi/qt5pi -hostprefix ~/raspi/qt5 -v -nomake examples -nomake tests -no-use-gold-linker