Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
5,737
I suggest installing Broadcom wl driver for this chip.
Run in terminal
sudo apt-get install bcmwl-kernel-source
If you choose to keep b43, you can edit that file in /etc/modprobe.d/ in Ubuntu too.
But wl should be more stable.
But if everything works there is no need to worry
Related videos on Youtube
Author by
MYaseen208
Updated on September 18, 2022Comments
-
MYaseen208 over 1 year
I'm using
Ubuntu 14.04.2 LTS
and the boot getting the following warning:Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
Using the following command at terminal
$ dmesg | grep b43
getting the following output:
[ 36.226712] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1 [ 36.226716] b43: probe of bcma0:0 failed with error -524
I'd highly appreciate if you help me to figure out this problem. Thanks in advance for your help.
Edited
Found this this solution for
linux
but don't know how to use this approach inUbuntu 14.04.2 LTS
.$ lspci -knn | grep Net -A2 12:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 [1028:0010] Kernel driver in use: bcma-pci-bridge $ dpkg -l | grep linux-firmware-nonfree
-
Pilot6 almost 9 yearsPlease edit your question and add output of
lspci -knn | grep Net -A2
and alsodpkg -l | grep linux-firmware-nonfree
terminal commands. -
MYaseen208 almost 9 yearsThanks @Pilot6 for your interest in my problem. I editted the question
-
-
MYaseen208 almost 9 years(+1) Thanks a lot @Pilot6. Works like a charm.