After update the display resolution changed automatically to 1024x768 and no alternative resolutions available

Question

After installing updates and rebooting my display resolution was 1024x768 and there is no option in the drop-down menu to change it to another resolution, resulting in a poor display.

A partial fix is already in the answers: installing another display driver (either proprietary or noveau one), but the problem keeps recurring after new system updates. A root cause and permanent fix is sought.

Solution 1

I had the same issue after I installed Ubuntu 20.04 . To resolve the issue, I when to "Software & Updates" --> "Additional Drivers" .

My computer was using Nouveau display driver. I changed it to Nvidia and my resolution went back 4k.

Solution 2

The same here with Xubuntu 20.04

Everything was fine after the installation. It is a new installation, not an upgrade.

Suddenly, after a couple of hours of use, the display just switched to 1024x768, following a logout (it was not the first time I logged out).

My hardware and driver configurations

$ sudo lshw -c video

  *-display                 
       description: VGA compatible controller
       product: RS780L [Radeon 3000]
       vendor: Advanced Micro Devices, Inc. [AMD/ATI]
       physical id: 5
       bus info: pci@0000:01:05.0
       version: 00
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi vga_controller bus_master cap_list rom
       configuration: driver=radeon latency=0
       resources: irq:18 memory:d0000000-dfffffff ioport:d000(size=256)
       memory:fe9f0000-fe9fffff memory:fe800000-fe8fffff memory:c0000-dffff

$ modprobe --resolve-alias radeon

radeon

$ sudo modinfo -F filename `lshw -c video | \
awk '/configuration: driver/{print $2}' | cut -d= -f2`

/lib/modules/5.4.0-40-generic/kernel/drivers/gpu/drm/radeon/radeon.ko

My (still) incomplete solution

I executed cvt to get the right modeline info for my VGA monitor. I had read the monitor's manual to get the specifications

$ cvt 1440 900 60

# 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz 
Modeline "1440x900_60.00"  106.50  1440 1528 1672 1904  900 903 909 934 -hsync +vsync

Then I created the following shell script /some-path/mydisplay.sh

#!/bin/bash
xrandr --newmode "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
xrandr --addmode VGA-0 1440x900_60.00
xrandr --output VGA-0 --mode 1440x900_60.00

Make it executable

$ sudo chmod a+x  /some-path/mydisplay.sh

Now run the script, and hopefully the resolution will be back to normal

$ sudo /some-path/mydisplay.sh

Still unsolved: make it permanent

I still couldn't make this solution persistent. Sometimes, after a logout or a restart, the display just goes back to 1024x768 mode. I don't find a pattern here.

Since Xubuntu 20.04 uses lightdm, I added the following lines yo my /etc/lightdm/lightdm-gtk-greeter.conf file; and also to a new config file I created: /etc/lightdm/lightdm.conf.d/01_mydisplay.conf

[Seat:*]
display-setup-script=/some-path/mydisplay.sh
user-session=mydisplay
allow-guest=false

I don't even know if these conf files are suitable for lightdm in Xubuntu 20.04.

I will appreciate any help regarding where is the right place to define permanently the right modeline configurations for Xubuntu 20.04 with lightdm

Comments

[szx]

I have the same problem and in my case this tab is just empty... no drivers available (AMD RX580), very strange

[user172056]

This solved my problem but in reverse. Was using nvidia drivers 450 and 460 when this problem arised, reverting to noveau drivers solved the problem.

[M.K]

In my case, I just had to open Software and Updates, and a message poped up regarding "Partial updates" (first time I saw that), which probably internally did this! It fixed it, thanks!