Blueman No adapters found
10,669
I put a patch based on what you found on my github, to install do
sudo apt install dkms git build-essential
git clone https://github.com/jeremyb31/newbtfix-4.15.git
sudo dkms add ./newbtfix-4.15
sudo dkms install btusb/4.0
Check results for mokutil --sb-state
if it says Secure Boot is enabled, then Secure Boot will need to be disabled when you reboot, if it says Secure Boot disabled, mokutil not installed, or system doesn't support EFI variables, just reboot
Related videos on Youtube
Author by
Nicola
Updated on September 18, 2022Comments
-
Nicola almost 2 years
I run this command:
uname -r; lsusb; lspci -nnk | grep -iA2 net; rfkill list all; hciconfig -a; dmesg | egrep -i 'blue|firm'
this is the output:
4.15.0-43-generic Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 007: ID 0e8d:763f MediaTek Inc. Bus 001 Device 003: ID 0bda:57b5 Realtek Semiconductor Corp. Bus 001 Device 002: ID 1ea7:0066 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10) Subsystem: ASUSTeK Computer Inc. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1043:200f] Kernel driver in use: r8169 Kernel modules: r8169 03:00.0 Network controller [0280]: MEDIATEK Corp. MT7630e 802.11bgn Wireless Network Adapter [14c3:7630] Subsystem: Foxconn International, Inc. MT7630e 802.11bgn Wireless Network Adapter [105b:e084] Kernel driver in use: mt7630e Kernel modules: mt7630e 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no hci0: Type: Primary Bus: USB BD Address: 70:77:81:79:E9:5A ACL MTU: 1021:4 SCO MTU: 128:2 DOWN RX bytes:580 acl:0 sco:0 events:31 errors:0 TX bytes:371 acl:0 sco:0 commands:31 errors:0 Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x5b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT [ 0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 14.784186] Bluetooth: Core ver 2.22 [ 14.784210] Bluetooth: HCI device and connection manager initialized [ 14.784214] Bluetooth: HCI socket layer initialized [ 14.784215] Bluetooth: L2CAP socket layer initialized [ 14.784219] Bluetooth: SCO socket layer initialized [ 15.479970] Bluetooth: hci0: last event is not cmd complete (0x0f) [ 34.672247] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 34.672249] Bluetooth: BNEP filters: protocol multicast [ 34.672252] Bluetooth: BNEP socket layer initialized [ 1536.260508] usb 1-6: device firmware changed [ 1539.411872] Firmware file "mt76x0.bin" Found [ 1541.312165] Bluetooth: hci0: last event is not cmd complete (0x0f)
The machine is an ASUS laptop, using Xubuntu 18.04.1 LTS
I installed the drivers for the wifi (MT7630E) and somehow they work (sometimes I need to reinstall them) but I was never able to get the bluetooth running, can you please help me? Thanks
-
Jeremy31 over 5 yearsWhat happens if you
sudo hciconfig hci0 up
-
Nicola over 5 yearsHi @Jeremy31, thanks, this is the output:
Can't init device hci0: Invalid request code (56)
-
Nicola over 5 yearsI found this guide but I don't understand what it means by "cd to your preferred build dir". What directory is the guide talking about?
-
Rashi over 4 years
-
-
JaydeepW almost 5 years
sudo dkms install btusb/4.0 Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... 'make' all KVER=4.10.0-38-generic....(bad exit status: 2) ERROR (dkms apport): binary package for btusb: 4.0 not found Error! Bad return status for module build on kernel: 4.10.0-38-generic (x86_64) Consult /var/lib/dkms/btusb/4.0/build/make.log for more information.
I am not an expert on this matter. So I will leave you with this. -
Jeremy31 almost 5 years@JaydeepW the 4.10 kernel is EOL, install 4.15