RTL8822BE Bluetooth device
Actually the problem might be that you install doesn't have the firmware for bluetooth, in terminal do
cd /lib/firmware/rtl_bt
sudo wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/rtl_bt/rtl8822b_config.bin
sudo wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/rtl_bt/rtl8822b_fw.bin
Then shutdown and boot
Related videos on Youtube
Lui
Updated on September 18, 2022Comments
-
Lui over 1 year
after i got my wifi working (RLT 8822BE wireless problems) I still got problems with Bluetooth. It is the same device as for wifi, the Realtek RTL8822BE. I installed the kernel 4.14. Somehow its there. As the relevant part of
$ sudo lshw
shows:
*-usb:1 description: Bluetooth wireless interface product: Bluetooth Radio vendor: Realtek physical id: 5 bus info: usb@1:5 version: 2.10 serial: 00e04c000001 capabilities: bluetooth usb-2.10 configuration: driver=btusb maxpower=500mA speed=12Mbit/s
So - i dont know what to do. I found that: https://github.com/torvalds/linux/commit/1110a2dbe69831abdcf119c3a9a4c4ef2d0905f8#diff-73c18c51833f458295d18481beb9507aR37
but have no clue what to do with it...
Can you help me?
Lui
Edit: Could this help? i typed:
dmesg | grep -i blue [ 2.517473] usb 1-5: Product: Bluetooth Radio [ 5.023742] Bluetooth: Core ver 2.22 [ 5.023759] Bluetooth: HCI device and connection manager initialized [ 5.023762] Bluetooth: HCI socket layer initialized [ 5.023765] Bluetooth: L2CAP socket layer initialized [ 5.023770] Bluetooth: SCO socket layer initialized [ 5.051195] Bluetooth: HCI UART driver ver 2.3 [ 5.051197] Bluetooth: HCI UART protocol H4 registered [ 5.051198] Bluetooth: HCI UART protocol BCSP registered [ 5.051216] Bluetooth: HCI UART protocol LL registered [ 5.051217] Bluetooth: HCI UART protocol ATH3K registered [ 5.051217] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 5.051254] Bluetooth: HCI UART protocol Intel registered [ 5.051271] Bluetooth: HCI UART protocol Broadcom registered [ 5.051272] Bluetooth: HCI UART protocol QCA registered [ 5.051272] Bluetooth: HCI UART protocol AG6XX registered [ 5.051273] Bluetooth: HCI UART protocol Marvell registered [ 5.083272] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked [ 5.373340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.373342] Bluetooth: BNEP filters: protocol multicast [ 5.373345] Bluetooth: BNEP socket layer initialized [ 7.135385] Bluetooth: hci0 command 0x1001 tx timeout [ 15.327417] Bluetooth: hci0: HCI_OP_READ_LOCAL_VERSION failed (-110) [ 15.677974] usb 1-5: Product: Bluetooth Radio [ 15.679651] Bluetooth: hci0: rtl: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8822 [ 15.679653] Bluetooth: hci0: rtl: loading rtl_bt/rtl8822b_config.bin [ 15.685329] Bluetooth: hci0: rtl: loading rtl_bt/rtl8822b_fw.bin [ 15.686830] Bluetooth: hci0: rom_version status=0 version=2 [ 15.686837] Bluetooth: cfg_sz 14, total size 20270 [ 21.586992] Bluetooth: RFCOMM TTY layer initialized [ 21.586999] Bluetooth: RFCOMM socket layer initialized [ 21.587008] Bluetooth: RFCOMM ver 1.11 [ 38.862067] usb 1-5: Product: Bluetooth Radio [ 39.028085] Bluetooth: hci0: rtl: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8822 [ 39.028087] Bluetooth: hci0: rtl: loading rtl_bt/rtl8822b_config.bin [ 39.028144] Bluetooth: hci0: rtl: loading rtl_bt/rtl8822b_fw.bin [ 39.029844] Bluetooth: hci0: rom_version status=0 version=2 [ 39.029852] Bluetooth: cfg_sz 14, total size 20270
Specially the line:
[ 5.083272] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
looks suspicious, no ?
Any ideas?
When I try:
$ dmesg | egrep -i 'blue|firm >
..and nothing for more than 10 minutes.
-
kukulo about 6 yearsCheck, whether the kernel you are using contains the patch. If not, a newer kernel is needed. If the kernel contains the code, install firmware for your bluetooth device and reboot.
-
Lui about 6 yearsThanks for answering! Unfrtunately I dont know how to check if the kernel contains the patch. And which patch should I search?
-
Christoph90 over 5 yearsI have the same problem using kernel 4.18.7-arch1-1-ARCH in ArchLinux. The firmware files from @Jeremy31's answer are already present. Machine is a ThinkPad A485
-
abu_bua over 5 yearsyou have a syntax error:
dmesg | egrep -i 'blue|firm'
, dont forget 2nd ' !
-
-
Lui about 6 yearsHm - very strange - it worked for about 5 minutes and now I am back to no bluetooth working. What can that be ?!
-
Jeremy31 about 6 yearsAdd results for
dmesg | egrep -i 'blue|firm
to your question now that you have the firmware -
Lui about 6 yearsHey - i rust realised. Now it works! So - i activated it, right ? Thank you Jeremy!
-
Lui about 6 yearsHm - its not working again. Sometimes (really not often) it works. Mostly it doesnt. Is there still hope ?
-
Lui about 6 yearsHey there, long time since my last entry. So - my bluetooth still doesn't work (only from times to times). May the last entry here: askubuntu.com/questions/777199/… be a possibility for me?