Can't connect to network with TL-WN722N (AR9271) USB adapter
Now I feel like a fool!
After couple days of trying to solve this issue I've found this guide:
WirelessTroubleshootingProcedure
so I used the command from step 2 - the long one.
In the output I've found that TL-WN722N support channels from 1 to 11. Try to guess what is the channel of my network...yes, it is channel 13.
Sollution found, problem solved.
We can close this topic :-D
Related videos on Youtube
joeedit
Hello, I am new to UBUNTU. I want to learn how to use and manage LINUX based OS.
Updated on September 18, 2022Comments
-
joeedit over 1 year
I already tried couple guides to solve my problem, but still I am not able to connect with my TL-WN722N to wifi network.
Device is up and recognized.
joe@G580:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 002: ID 09da:000e A4 Tech Co., Ltd Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 002 Device 003: ID 174f:1468 Syntek joe@G580:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off joe@G580:~$ sudo lshw -C network [sudo] password for joe: *-network description: Ethernet interface product: AR8162 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: xx:xx:xx:xx:xx:xx size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=alx driverversion=1.2.3 duplex=full firmware=N/A ip=192.168.1.31 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:d3900000-d393ffff ioport:2000(size=128) *-network DISABLED description: Wireless interface physical id: 3 bus info: usb@1:1.2 logical name: wlan0 serial: xx:xx:xx:xx:xx:xx capabilities: ethernet physical wireless configuration: broadcast=yes driver=ath9k_htc driverversion=3.8.0-35-generic firmware=1.4 link=no multicast=yes wireless=IEEE 802.11bgn joe@G580:~$ rfkill list 0: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no
So I already installed drivers and firmware. I tried to install Win drivers with ndiswrapper, but I got an error message that ndiswrapper is not installed(solving this issue is in progress). This device was working before I had to reinstall Ubuntu 12.04. Now I can see avaible wifi networks, but I'm not able to connect to any of them. When I try to connect to wifi network, it's still trying to connect again and again but it fails every time.
I'm looking for your advices(I'm really desperate now!)
Thanks!
-
gavenkoa almost 9 yearsI trap into same problem with TL-WN722N.
iwlist chan
show me that device support only channel 1-11 but I set channel to 12 in my router to better avoid interference with another wifi devices.