Windows 8.1 Wireless Authentication WPA2-Enterprise
7,601
You want:
netsh wlan set profileparameter name="NAME" authentication=WPA2 encryption=TKIP
If you type netsh wlan set profileparameter ?, the help that comes up lists the available values for the settings.
Usage: set profileparameter [name=]<string> [[interface=]<string>]
[SSIDname=<string>] [ConnectionType=ESS|IBSS] [autoSwitch=yes|no]
[ConnectionMode=auto|manual] [nonBroadcast=yes|no]
[authentication=open|shared|WPA|WPA2|WPAPSK|WPA2PSK]
[encryption=none|WEP|TKIP|AES] [keyType=networkKey|passphrase]
[keyIndex=1-4] [keyMaterial=<string>] [PMKCacheMode=yes|no]
[PMKCacheSize=1-255] [PMKCacheTTL=300-86400] [preAuthMode=yes|no]
[preAuthThrottle=1-16 [FIPS=yes|no]
[useOneX=yes|no] [authMode=machineOrUser|machineOnly|userOnly|guest]
[ssoMode=preLogon|postLogon|none] [maxDelay=1-120]
[allowDialog=yes|no] [userVLAN=yes|no]
[heldPeriod=1-3600] [AuthPeriod=1-3600] [StartPeriod=1-3600]
[maxStart=1-100] [maxAuthFailures=1-100] [cacheUserData = yes|no]
Related videos on Youtube
Author by
Admin
Updated on September 18, 2022Comments
-
Admin over 1 year
For the network at my University I have to set wireless authentication to WPA2-Enterprise using TKIP encryption. Since Windows 8.1 doesn't seem to have the usual wireless settings, I tried doing it via cmd. I tried
wlan set profileparameter name="NETWORK_NAME" authentication="wpa2-enterprise"
and
wlan set profileparameter name="NETWORK_NAME" AuthMode="wpa2-enterprise"
which both didn't work (invalid value "WPA2-Enterprise" for command option authentication / AuthMode).
Anyone know the correct paramter to set the authentication mode accordingly?
Thanks!
-
Admin about 9 yearsDid you try AuthMode="WPA2SK" ? When it says syntax error, it probably shows you a list of allowed commands. Check that out!
-