Windows Wont boot up after clearing CMOS
6,909
What mode was your hard drive controller in when you installed Windows?
ATA / AHCI / RAID ?
Resetting your CMOS probably changed it. You need to access your CMOS setup program and change it back to what it was when Windows was installed.
The INACCESSIBLE_BOOT_DEVICE bug check frequently occurs because of a boot device failure. During I/O system initialization, the boot device driver might have failed to initialize the boot device (typically a hard disk).
Related videos on Youtube
Author by
oaftobark
hello world Just a skid who likes to code, (at least tries.)
Updated on September 18, 2022Comments
-
oaftobark over 1 year
I cleared my cmos and windows cant boot up. it says
inaccessible_boot_device
how can i fix this? btw im using a ssd for windows and a hdd for other stuff-
Admin over 7 yearsare your SATA buses configured for AHCI or ATA? what happens if you switch it?
-
-
oaftobark over 7 yearsi removed my hdd sata cable to another slot and it got fixed. also i changed it to RAID mode again thanks for help
-
oaftobark over 7 yearsi tried removing ram but it didnt had an effect. but i removed the hdd and it worked! thanks so much.